Coyote Point Systems Equalizer Especificaciones Pagina 98

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 594
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 97
Network Configuration
7: pass on interface wm0 hits: 6 bytes: 956
From To
10.0.0.0/24 -> any
8: pass on interface wm0 hits: 0 bytes: 0
From To
any 192.168.211.0/24
-> 192.168.105.0/24
10.0.0.0/24
0.0.0.0/0
9: block all hits: 0 bytes: 0
IP NAT Rules:
List of active MAP/Redirect filters:
map wm0 192.168.211.0/24 -> 10.0.0.68/32 proxy port ftp ftp/tcp
map wm0 192.168.211.0/24 -> 10.0.0.68/32 portmap tcp/udp auto
map wm0 192.168.211.0/24 -> 10.0.0.68/32
map wm0 192.168.105.0/24 -> 10.0.0.68/32 proxy port ftp ftp/tcp
map wm0 192.168.105.0/24 -> 10.0.0.68/32 portmap tcp/udp auto
map wm0 192.168.105.0/24 -> 10.0.0.68/32
The DSS Table contains the two destination networks that we have configured: the 'internal' destination network
and the Internet. It specifies that when communicating with the 192.168.105/24 network, Equalizer should send
traffic from the local network with IP address 192.168.211.8, and if a packet needs a source IP address, this is the
IP address that should be used. Likewise, when communicating with the rest of the Internet, Equalizer should
send packets from the local network with IP address 10.0.0.68, and this is the IP address that should be used if a
source IP address is needed.
Note that the DSS Table is sorted such that the more specific entries are above less specific entries. When
Equalizer is processing this table, the first entry to match is the one that will be used.
The source routing table now has source entries for two local networks configured in the system, as well as the
two destination networks. The destination routing tables for each source look almost identical: Whenever talking to
the 192.168.105.0/24 network, the gateway is 192.168.211.2 and whenever talking to anywhere else, the gateway
is 10.0.0.254.
Note - Destination network source routing entries are created automatically based on the destination network
configurations: a source route entry is created for every destination network with the same destination routes as the
local network it is attached to.
Any rules that previously included only a local network have been updated to also include the destination network
attached to that local network.
98
Copyright © 2013 Coyote Point Systems. A subsidiary of Fortinet, Inc.
Vista de pagina 97
1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 593 594

Comentarios a estos manuales

Sin comentarios