Coyote Point Systems Equalizer Especificaciones descargar pdf (Pagina 106)

100

101

Network Configuration

1. Log into the GUI using a login that has add/del access for global parameters (See "Logging In" on page 192)

2. Click on Equalizer in the left navigational pane and select the subnet of the internal or server VLAN. The

subnet configuration screen will be displayed as shown below.

3. Enter an Outbound NAT Address that should be used for this subnet when communicating with hosts on the

Internet. This address should be the main IP, failover IP, or cluster IP address present on the Equalizer on

your external subnet.

4. Enter a Default Route that is the same as the Default Route of the external subnet.

5. If there are any static routes configured for the external network, click on the Static Routes tab and replicate

the static routing configuration for that network on the server subnet. (See "Configuring Subnet Destination

Routes" on page 111)

6. Click on Commit to save your settings.

To enable outbound NAT on a multi VLAN configuration using the CLI:

1. Log in to eqcli as described in "Starting the CLI" on page 128.

2. Assign an Outbound NAT address on the internal (server) subnet that should be used when communicating

with hosts on the Internet. This address should be the main IP, failover IP, or cluster IP address present on

the Equalizer on your external subnet.

eqcli > vlan [internal vlan name] subnet [internal subnet name] outbound_

nat [IP address]

3. Enter a Default Route that is the same as the Default Route of the external subnet.

106

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 593 594

Comentarios a estos manuales

Sin comentarios

Coyote Point Systems Equalizer Especificaciones Pagina 106

Comentarios a estos manuales

Relacionado con productos y manuales para Ecualizadores de audio Coyote Point Systems Equalizer