Coyote Point Systems Equalizer Especificaciones descargar pdf (Pagina 50)

100

101

First Time Configuration Using EQ OS 10

First Time VLAN Configuration Example

Follow the steps below to get Equalizer onto your network and start using the (CLI and GUI).

1. Log in using the default administrative user name, touch:

Equalizer -- EQ/OS 10.0.4c

Username: touch

Password:

12008239: There are Envoy geocluster configured. These are automatically

disabled until an Envoy license is loaded.

EQ/OS 10.0.2f

Welcome to Equalizer!

eqcli >

2. Change the password for the ‘touch" login. Enter:

eqcli > user touch passwd

Follow the command prompts to create a new password.

3. Configure a VLAN for SSH and GUI management, as in this example. It should be noted that the E250GX

Equalizer has two non-switched ports and the E370LX Equalizer has 6 non-switched ports. Since they are

non-switched they have separate interfaces and allow 1 port per VLAN. The example below shows

switched ports - meaning that the Equalizer being configured can use multiple ports on a VLAN:

eqcli > vlan 172net vid 1 untagged_ports 1,2

4. Create a VLAN subnet. For our example, we’ll enable SSH login and the GUI over HTTP on the 172net

VLAN. We’ll also set the def_src_addr flag so this subnet’s IP address will be used as the source address

for outgoing packets. If you want to license the system online (see the next section, below), you must

define a subnet that has Internet connectivity.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 593 594

Comentarios a estos manuales

Sin comentarios

Coyote Point Systems Equalizer Especificaciones Pagina 50

Comentarios a estos manuales

Relacionado con productos y manuales para Ecualizadores de audio Coyote Point Systems Equalizer