Coyote Point Systems Equalizer Especificaciones descargar pdf (Pagina 467)

100

101

c. Set the command and heartbeat flags on the subnets. One subnet must have the command

flag enabled, both subnets need the heartbeat flag since we want to fail over when there is a

connectivity issue on any subnet:

eqcli > vlan vlan2 subnet 172net flags command,heartbeat

eqcli > vlan vlan3 subnet 192net flags heartbeat

d. Change the system hostname so it is unique:

eqcli > hostname name

e. Set the timezone.

Enter: eqcli > timezone?

Locate your timezone in the displayed list and press "q" to quit out of the list. Then,

type in your timezone number and press <Enter>, as in this example for the

"America/New York" time zone:

eqcli > timezone 161

f. If Equalizer can reach the Internet, add a name server so that NTP will work and time will be

the same across all Equalizers:

eqcli > name-server IP_address

Otherwise, set the time manually on all systems to the current time:

eqcli > date HHmmss

In the above command, HH is hours, mm is minutes, and ss is seconds. Seconds are

optional.

g. Change the name of the local peer so it’s easier to recognize, as in this example for Equalizer

Eq-A:

eqcli > peer e<TAB> name Eq-A

467

Equalizer Administration Guide

1 2 ... 462 463 464 465 466 467 468 469 470 471 472 ... 593 594

Comentarios a estos manuales

Sin comentarios

Coyote Point Systems Equalizer Especificaciones Pagina 467

Comentarios a estos manuales

Relacionado con productos y manuales para Ecualizadores de audio Coyote Point Systems Equalizer