Coyote Point Systems Equalizer Especificaciones descargar pdf (Pagina 108)

100

101

Network Configuration

The same information for a single port can be displayed by specifying the port name:

eqcli > show interface swport03

Interface Number : swport03

Autonegotiation mode : full

Duplex mode : full

Link Speed : 1000

Link Status : Link Up

Maximum MTU : 0

eqcli >

Port settings are as follows:

l Autonegotiation Mode - One of the following:

full - Full autonegotiation at all supported speed and duplex settings.

select - Autonegotiation at the current speed and duplex parameter settings only.

force - Set the port to the current speed and duplex parameter settings with no autonegotiation.

Whether you choose full, select, or force depends on the operating characteristics of the device

on the other end of the connection. Check the documentation for the other device and try to match

the settings as much as possible on both sides of the connection.

Duplex Mode - If the port status is Link Up, this is the current port duplex setting. If the status is Link

Down, this is either the highest duplex that can be negotiated, or the force setting. Can be set to full or half.

Link Speed - If the port status is Link Up, this is the current port speed. If the status is Link Down, this

is the highest speed that can be negotiated, or the Force setting. Can be set to 10, 100, or 1000 Mbits.

108

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 593 594

Comentarios a estos manuales

Sin comentarios

Coyote Point Systems Equalizer Especificaciones Pagina 108

Comentarios a estos manuales

Relacionado con productos y manuales para Ecualizadores de audio Coyote Point Systems Equalizer