Coyote Point Systems Equalizer Manual de usuario descargar pdf (Pagina 5)

Coyote Point Systems Inc.

Enabling VLB Agents on a Cluster

Once you have enabled VLB on Equalizer as shown in the previous section, you can configure clusters with VLB

Agents. Doing so enables Equalizer to communicate with the Virtual Center and get detailed information on all the

virtual machines configured in the cluster.

To enable VLB Agents on a cluster:

1. Log into Equalizer using an account that as

add/del permission on the cluster to be modified.

2. Click the cluster name in the left frame. In the

Configuration > Required tab, select server agent in the policy

drop down box. The server agent policy gives preference to the values returned by the VLB agent, and is the

recommended setting for VLB clusters.

3. Click

commit to save the policy change.

4. Select the

Configuration > Probes tab:

5. Select

VLB in the agent type field.

6. Click

commit to save your settings.

Adding Servers to a Cluster with VLB Agents Enabled

To add a server to a VLB cluster, right click on the cluster name in the left frame and select the Add Server

command from the menu. When adding servers to a VLB cluster, note the following:

• You must specify the IP address, port, etc., for a virtual machine managed by the Virtual Center (or ESX

Server) with which Equalizer is configured to communicate.

1 2 3 4 5 6 7 8

Sin comentarios

Coyote Point Systems Equalizer Manual de usuario Pagina 5